Collaborative innovation through Materials-Process-design:
1.Volume of motor controller reduced by 40% (reduce copper consumption by 28%)
2.Car-charger (OBC) assembly time down by 55% (modular package design)
3.System life cycle extended to 15 years / 300,000 km (reduced warranty cost)
4.The ECU package module maintenance rate decreased by 62%
The DE-CW-1310 DFB EPI wafer, a high-performance epitaxial structure designed for distributed feedback (DFB) lasers operating at 1310 nm....
Ceramic thin-filmvacuum sensor Optical gas massflowmeter Liquid mass flowmeter Force sensor MEMS...
Photoelectric sensing chip Light source chips Optical transmission and modulationchips Optical detection and receptionchips...
Using a“Detach Core”which has two-layers carrier foil structure on the surface as a core, and forming...
Tenting process is a kind of subtractive process, the process as follows: Laminating photosensitive film...
Modified Semi-Added Process abbreviated as mSAP, which can be used on the core or build-up layers, pattern...
Semi-Added Process abbreviated as SAP, using on the build-up-layer pattern forming as follow：First depositing...
The product generally adopts the pressing lamination process of semi-curing sheets , and line formation...
The products generally adopt the Build-up Film Lamination process, and the circuit formation uses the...
Equipment features: 1. Non-destructive precision testing Micrometer-level probe contact technology...
