Our material is verified by the triple protection system:
1.Radiation resistance reinforcement: SIC substrate + gold palladium alloy shield, total radiation resistance up to 300 K RAD (SI)
2.Wide temperature domain operation: -269°C (liquid helium temperature zone) to + 350°C (NASA-ESA certification)
Vacuum compatibility: gas output rate <110 ⁹ TORR · L / S / CM², meet the ASTM E595 aerospace standards
Diamond-Copper Thermally Conductive Composite. High thermal conductivity, tunable CTE, robust.
The DE-CW-1310 DFB EPI wafer, a high-performance epitaxial structure designed for distributed feedback (DFB) lasers operating at 1310 nm....
Ceramic thin-filmvacuum sensor Optical gas massflowmeter Liquid mass flowmeter Force sensor MEMS...
Photoelectric sensing chip Light source chips Optical transmission and modulationchips Optical detection and receptionchips...
Using a“Detach Core”which has two-layers carrier foil structure on the surface as a core, and forming...
Tenting process is a kind of subtractive process, the process as follows: Laminating photosensitive film...
Modified Semi-Added Process abbreviated as mSAP, which can be used on the core or build-up layers, pattern...
Semi-Added Process abbreviated as SAP, using on the build-up-layer pattern forming as follow：First depositing...
The product generally adopts the pressing lamination process of semi-curing sheets , and line formation...
The products generally adopt the Build-up Film Lamination process, and the circuit formation uses the...
